The Mean Well LPF-60-36 is a compact 60 W LED driver with a 36 V output and a 1.67 A limit, fully sealed to IP67 in a double-insulated Class II plastic housing. It suits smaller 36 V LED strip runs, bars and fittings where a slim, waterproof driver is the priority.
Small, sealed, simple
At 162.5 mm long and 43 mm wide it fits inside cabinets, behind signs and in tight fittings where a metal-cased driver will not. Class II double insulation means no earth connection is needed, and IP67 sealing lets it sit in damp or outdoor locations.
Dual-mode output
It holds 36 V for LED strip and modules, and moves into constant current between 21.6 and 36 V if the load reaches 1.67 A — so it also drives LEDs directly within that window.
Specifications
| Model | Mean Well LPF-60-36 |
| Output mode | Constant voltage + constant current |
| Rated output | 36 V DC, 1.67 A |
| Constant-current region | 21.6–36 V |
| Rated power | 60.12 W |
| Input | 90–305 VAC |
| Efficiency | 90% |
| Dimming | None |
| Ingress rating | IP67 |
| Insulation | Class II, no earth required |
| Dimensions | 162.5 × 43 × 32 mm |
| Leads | Bare input and output leads, no plug |
| Approvals | UL8750, ENEC, CB, CE |
Mean Well figures.
FAQ
Can I dim it?
No. For dimming or AC Infinity controller control, choose the HLG-120H-54B or HLG-320H-C2100AB.
LPF-60-36 or ELG-100-36A?
The LPF is for loads up to about 50 W where size and sealing matter. Above that, or if you want to trim the output, use the ELG-100-36A.
Can it be used outdoors?
It is IP67 sealed and rated for wet locations. The connections at each end still need to be made weatherproof.
Does it come with a plug?
No — bare leads, connected to mains by a licensed electrician.