The AC Infinity IONBEAM Green is a 40.7 cm green LED work light for tending your plants during their dark period. Its 18 Osram 525 nm diodes put out a true green light that, kept under 10 nmol/s, lets you inspect, water and work in the tent without disturbing the night cycle. It draws 12 W, dims across four levels and switches itself off after 5–20 minutes, so it never gets left on. Quick Bloom Lights is the official Australian importer for AC Infinity: stocked in Sydney, shipped domestically.
Plant-gentle coverage
Photoperiod plants in flower need an unbroken dark period, which makes checking on them at night a problem — a torch or room light can be enough to interrupt it. Green light at a low intensity is the accepted way around that. AC Infinity's guidance is to keep the IONBEAM Green under 10 nmol/s at the plants, which gives you enough light to work by — just short of enough to read a book — while leaving the night cycle intact.
You control that intensity three ways: the four-level dimmer, the distance from the plants, and the detachable diffuser, which softens glare and spreads the light more evenly across the space. The bar mounts magnetically to tent frames, bar-style fixtures and other magnetic surfaces, so you can set its distance exactly. AC Infinity rate it for grow spaces up to 10x10.
With the lights on, it has a second job: it adds green to fixtures that run only red and blue diodes, filling out their spectrum.
Smarter controls
The controller has four brightness levels in 25% steps and an auto-off timer in 5, 10, 15 and 20 minute increments, so the light switches off when you walk away. Each bar is IP65 rated and built in a heavy-duty unibody housing to handle water, dust and humid tents.
Full specifications
| Manufacturer | AC Infinity Inc. |
| Product / model | IONBEAM Green / AC-NEG16 |
| UPC | 819137024380 |
| Diodes | Osram 525 nm, 18 per bar |
| Power | 12 W |
| Voltage / frequency | 100–240 V AC / 50–60 Hz |
| Power connection | US plug (NEMA 1-15, Type A) on the power adapter — use an earthed Australian adapter or fit an Australian plug |
| Light bar dimensions | 407 × 27.5 mm (16.02 × 1.08″) |
| Diffuser length | 371 mm (14.61″) |
| Controller | Dimming timer controller, 68 × 37 mm (2.68 × 1.46″) |
| Brightness | 4 levels, 25–100% |
| Auto-off timer | 5, 10, 15 or 20 minutes |
| Power cord length | 2.44 m (8 ft) |
| UIS extension cord | 3.05 m (10 ft) |
| Ingress protection | IP65 |
| Operating range | 0–60 °C (32–140 °F), 35–85% RH |
| Rated lifespan | 50,000 hours (manufacturer rating) |
| In the box | Light bar, controller, power adapter, diffuser, mounting bar, 2 wire mounts, 2 bar extension cords, UIS extension cord, cable ties, wood screws, hook-and-loop fasteners |
| Manual | Download PDF |
FAQ
Will the US plug work in Australia?
Yes, with an adapter. The power adapter is rated 100–240 V, 50/60 Hz, so it runs on Australian mains. Use an earthed (grounded) plug adapter rated for Australian outlets, or have a licensed electrician fit an Australian plug. No adapter is included.
Will green light interrupt my plants' dark period?
Not when it is used as AC Infinity intend: keep it under 10 nmol/s at the plants. Mount it as far from the canopy as practical, start at the lowest brightness, fit the diffuser, and keep sessions short — the auto-off timer does that for you.
How big a space does it light?
AC Infinity rate one bar for grow spaces up to 10x10. In a smaller tent you will usually run it at a lower level.
Can I leave it on as part of my main lighting?
It is designed as a work light, not a grow light — at 12 W it adds green to a red and blue fixture's spectrum but does not replace a main light.
Does it work with my AC Infinity controller?
Yes. It is part of the UIS platform and connects to a UIS controller with the included UIS extension cord.
Is this genuine AC Infinity stock?
Yes. Quick Bloom Lights is the official Australian importer and distributor for AC Infinity. Stock is held in Sydney and ships domestically.